Continuous Vibration Monitoring
From Condition Monitoring to Confident Action. A Reliability Partnership that Drives Results.
AssetWatch offers continuous vibration monitoring that turns real-time asset data into clear, expert written next steps. Maintenance and reliability teams get AI-powered anomaly detection, prioritized alerts, and prescriptive guidance from a CAT III/IV certified and dedicated expert—all in one platform, supported by wireless sensors that are up and running in days.
Rugged Wireless Sensors
Hardware Highlights
Purpose-built hardware for continuous condition monitoring. Wireless, rugged, and installed in minutes on the assets that matter most.
Vibration Monitoring
Continuous vibration data, not periodic snapshots. Catch developing faults between route-based checks instead of missing them entirely.
Triaxial Accelerometer
Measures vibration on all three axes at once. Full directional picture of what the asset is doing, from imbalance to misalignment to bearing wear.
No IT required
AssetWatch provides the wireless network needed to collect your data, so you can start monitoring right away and see findings in days, not months.
Rugged Temperature
Operating Range
Built for the plant floor. Reliable performance in high heat, cold, humidity, and washdown environments.
%201-(Compressify.io).png)
See What Our Customers Say
“We also had a predictive monitor alert that came up on one of our motors, on one of our main pieces of equipment. That would have been a six-week downtime event, and we were able to get ahead of that with our maintenance team based on the information that AssetWatch provided us.”
- Michael Patulski, Director of Operational Excellence at INX International
4-Step Process
How It Works
AssetWatch is continuous condition monitoring that gives maintenance and reliability teams a centralized dashboard for every connected asset in your facility: AI-driven anomaly detection, prioritized alerts, prescriptive workflows, and ROI reporting.
01 | Install
We rapidly deploy so your team doesn't have to. Installation of AssetWatch Vibration monitoring devices usually takes less than one day to complete. Every sensor comes with a lifetime warranty, and our support team handles the setup of the facility and assets on the AssetWatch platform.
02 | Connect
Your vibration monitoring system is ready to begin monitoring from day one. Maintenance-free, wireless cellular-communication hubs are included in the price with no need to get on your corporate Wi-Fi network. No CapEx, no IT coordination, and no additional headaches required.
03 | Analyze
Powered by machine learning, AssetWatch continuously collects and processes vibration data using proprietary algorithms. Vibration monitoring systems automatically detect changing fault patterns and prioritize asset risks early so you can maintain rotating machine health and improve uptime.
04 | Partner
What sets AssetWatch apart is our ability to turn data into action. Your dedicated and locally-based Condition Monitoring Engineer (CME)—a certified CAT III or IV vibration analyst—provides prescriptive analysis via 2-way communication to keep your teams aligned. Before your program even begins, your CME works with you to review your facility’s assets and determine which will drive the highest ROI through continuous condition monitoring.
Scale Your Program
Refine and Repeat
AssetWatch helps you scale from pilot assets to full facility coverage, validating ROI through documented prevented failures and standardizing proactive maintenance workflows your whole team can follow. Achieve optimal predictive maintenance and continuously improve your vibration monitoring system as the data builds.
.png)
One Platform. Hardware, Software, and Expert Analysis Included.
Get everything you need with AssetWatch, right out of the box.
Wireless Sensor Hardware
Vibration Sensor Specs
Purpose-built hardware that installs in minutes and monitors your equipment around the clock, no wiring required. Download the full spec sheet for complete details.
No wires needed
Waterproof & dustproof
5+ yrs. on standard settings
100-lb force rare earth magnet
Vibration + temperature
Available for high-risk environments
AI Vibration Analysis
What Your Team Can See and Do Inside AssetWatch
Evaluate performance across all your facilities to drive continuous improvement and operational alignment.
01
Early Anomaly Detection
Early Anomaly Detection
Early Anomaly Detection
AssetWatch AI continuously monitors every connected asset, detects deviations early, and ranks each by risk level—surfacing imbalance, misalignment, looseness, and bearing degradation (among other issues) before they become failures. This unique combination of machine learning and expertise cuts through the noise of data and offers alerts teams can trust.
02
Prescriptive Insights
Prescriptive Insights
Prescriptive Insights
When an anomaly is flagged, your CME sends a prescriptive alert, specifying what to inspect and what action to take. Your continuous vibration monitoring includes efficient two-way communication that keeps everyone in the loop from detection to resolution, with every issue tracked, timestamped, and documented.
03
Dynamic ROI
Dynamic ROI
Dynamic ROI
AssetWatch’s intelligent vibration monitoring system quantifies the value of every prevented failure, tracking avoided downtime and calculating maintenance impact over time so you can clearly report results to leadership.
04
Multi-Facility View
Multi-Facility View
Multi-Facility View
For reliability leaders overseeing multiple sites, AssetWatch’s multi-facility dashboard provides a standardized view of asset health and maintenance risk across every location—with the ability to drill down to asset level from a single login.
From Reactive to Predictive
Hear how some of our customers transformed their maintenance program with AssetWatch.
Nationwide Field Service
Proudly servicing all locations in the US & Canada
Professional installation by in-house Reliability Technicians, typically completed in less than one day
Our Field Service team members are strategically positioned across 80% of major industrial metros
Multiple site visits per year included, so support is proactive, not just reactive
Dedicated CAT III or IV Vibration Analyst assigned to every site, included in program pricing
Lifetime warranty on all wireless vibration sensors
No network integration or ongoing hardware maintenance
Continuous Vibration Monitoring FAQs
AssetWatch’s continuous vibration monitoring is a platform that collects and analyzes real-time vibration data from equipment around the clock. The software detects developing issues like bearing wear, imbalance, or misalignment before they cause failures. Compare continuous vs. route-based vibration monitoring.
Continuous vibration monitoring software monitors every connected asset 24/7, detects anomalies, prioritizes risk, and triggers prescriptive workflows so your team knows what to fix and when before failure occurs. It provides a dashboard for trend analysis and tools for tracking and reporting ROI. The goal is to shift from reactive to planned, proactive maintenance.
AssetWatch Vibration sensors transmit vibration data through cellular-connected hubs to the AssetWatch platform, where AI detects anomalies. The platform analyzes that data in real time, detects anomalies, and surfaces prioritized alerts inside the dashboard. Your dedicated CME then sends prescriptive alerts with specific next steps. AssetWatch integrates with your CMMS to keep everything in one place.
Yes—hardware, software, and a dedicated Condition Monitoring Engineer are all included. There’s no separate software license, no hardware procurement, and consulting fees are included.
A standalone sensor captures data, but data alone doesn’t prevent failures. Vibration monitoring software turns that data into prioritized alerts, documented workflows, and measurable ROI. When paired with certified analyst expertise, the software bridges the gap between raw vibration readings and the specific maintenance action your team needs to take.
remote equipment monitoring
The Ways We Monitor
Every asset requires a different monitoring strategy. AssetWatch offers multiple monitoring solutions so you get the right coverage for every machine and every condition.
Electrical Monitoring
Continuously monitor three-phase current, RPM, and panel temperature to catch winding degradation, phase unbalance, and overload conditions weeks before they cause motor failure.
Oil Analysis
Route-Based Vibration Monitoring
Customer Success Stories
Explore Case Studies
See how AssetWatch helps customers improve equipment reliability and reduce costly disruptions through real-world success stories.
.avif)
