Read the stories that allow our customers to see an average of 8x ROI

There was elevated vibration related to the gear mesh. The CME recommended taking an oil sample to check for wear metals. The Lubrication CME reviewed the oil analysis report and noted wear metals, particle count, and water content were all high.

Both CMEs collaborated with the customer on a plan to inspect the gearbox, check the oil level and then change the oil.

The customer found the input seal was leaking and there was very little oil in the gearbox. The seals were replaced and the oil was changed. The customer avoided replacing the gearbox and noted a savings of $50k.

The oil report analysis identified improper viscosity across multiple compressors​.

The CME collaborated with the customer to verify what lubricant was supposed to be used and recommended an oil change to the desired viscosity​.

The customer identified the lubricant as EP 320 and changed the oil, noting that they saved $5,000/unit on 5 units.